Command Reference Guide

80 ● display ip routing-table 3Com Router 5000 Family and Router 6000 Family
Command Reference
display ip routing-table
Purpose Use the display ip routing-table command to view the routing table
summary.
Syntax display ip routing-table
Parameters None
Example View the summary of current routing table.
<3Com > display ip routing-table
Routing Table: public net
Destination/Mask Proto Pre Cost Nexthop Interface
1.1.1.0/24 DIRECT 0 0 1.1.1.1 Interface
serial1/0/0
1.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
2.2.2.0/24 DIRECT 0 0 2.2.2.1 Interface
serial2/0/0
2.2.2.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
3.3.3.0/24 DIRECT 0 0 3.3.3.1 Interface
ethernet1/0/0
3.3.3.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
4.4.4.0/24 DIRECT0 0 4.4.4.1 Interface
ethernet2/0/0
4.4.4.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.0/8 DIRECT 0 0 127.0.0. 1 InLoopBack0
127.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
View This command can be used in the following views:
■ Any view
Description This command views routing table information in summary form. Each line represents
one route. The contents include destination address/mask length, protocol,
preference, cost, next hop and output interface.
Only the current used route, that is, the best route, is displayed via the display ip
routing-table command.