Command Reference Guide

110 ● display ip netstream export 3Com Router 5000 Family and Router 6000 Family
Command Reference
display ip netstream export
Purpose Use the display ip netstream export command to view statistics about
exported NetStream UDP packets.
Syntax display ip netstream export
Parameters None
Example Display statistics about NetStream UDP packets.
<R6000> display ip netstream export
Version 5 export information:
Stream destination IP(UDP): 10.10.0.10 (30000)
Stream source interface: Ethernet4/0/0
Exported stream number: 16
Exported UDP datagram number(failed number): 16(0)
Version 8 AS aggregation export information:
Stream destination IP(UDP port): 10.10.0.10 (30000)
Stream source interface: Ethernet4/0/0
Exported stream number: 16
Exported UDP datagram number(failed number): 2(0)
View This command can be used in the following views:
■ Any view
Table 16 Description on the fields of the display ip netstream export command
Field Description
Version 5 export information Statistics for exported version 5 UDP packets
Stream destination IP(UDP) Destination address and UDP port number of exported UDP
packets
Stream source interface Source interface of exported UDP packets
Exported stream number Number of exported streams
Exported UDP datagram
number(failed number)
Number of exported UDP packets (number of failed sending
attempts)
Version 8 AS aggregation export
information
Statistics for exported version 8 AS aggregation UDP packets.
Displayed only when NetStream aggregation is enabled.