Command Reference Guide

72 ● display bgp routing peer { advertised | received } 3Com Router 5000 Family and Router 6000 Family
Command Reference
display bgp routing peer { advertised |
received }
Purpose Use the display bgp routing peer command to view the routing information
the specified BGP peer advertised or received.
Syntax display bgp routing peer peer-address { advertised | received } [
network-address [ mask ] | statistic ]
Parameters peer-address
Specifies the peer to be displayed.
advertised
Routing information advertised by the specified peer.
received
Routing information the specified peer received.
network-address
IP address of the destination network segment.
mask
Mask of the destination network segment.
statistic
Displays the statistics for the route.
Example View the routing information advertised by BGP peer 10.10.10.1.
[3Com ] display bgp routing peer 10.10.10.1 advertised
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
B - balance
Dest/mask Next -Hop Med Local-pref Origin As-path
*> 10.10.10.0/24 0.0.0.0 INC
For description on the output of the command, see Table 7.
View This command can be used in the following views:
■ Any view
Related Command display bgp peer