Command Reference Guide

68 ● display bgp routing dampened 3Com Router 5000 Family and Router 6000 Family
Command Reference
display bgp routing dampened
Purpose Use the display bgp routing dampened command to view BGP dampened
routes.
Syntax display bgp routing dampened
Parameters None
Example Display BGP dampened routes.
<3Com > display bgp routing dampened
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
B - balance
Dest/Mask Source Damping-limit Origin As-path
-----------------------------------------------------------------
#D 11.1.0.0 133.1.1.2 1:20:00 IGP 200
View This command can be used in the following views:
■ Any view
Table 9 Description on the fields of the display bgp routing dampened command
Field Description
Flags State flags:
# – valid
^ – best
D – damped
H – history
I – internal (IGP)
S – aggregate suppressed (suppressed)
B – balance
#D Valid and damped routes
Dest/Mask The route to this destination network segment is damped.
Source Next hop of the route
Damping-limit Time after which the route can recover from the damped state
Origin Origin attribute of the route, which can take on one of the following values:
IGP Indicates that a route is interior to the AS.
Aggregate routes and the routes defined using the network
command are considered IGP routes.
EGP Indicates that a route is learned from the exterior gateway
protocol (EGP).
INC Short for INCOMPLETE. It indicates that the origin of a route is
unknown and the route is learned by other means.
As-path AS-path attribute of the route. It records all ASs traversed by the route for
avoiding routing loops.