Command Reference Guide

66 ● display bgp routing community 3Com Router 5000 Family and Router 6000 Family
Command Reference
display bgp routing community
Purpose Use the display bgp routing community command to view the routing
information related to the specified BGP community number in the routing table.
Syntax display bgp [ multicast | [ vpnv4 { all | route-distinguisher
route-distinguisher | vpn-instance vpn-instance-name } ] ] routing
community [ aa:nn | no-export-subconfed | no-advertise | no-export ] [
whole-match ]
Parameters aa:nn
Specifies a community number.
no-export-subconfed
Indicates not to advertise matched routes outside the
AS.
no-advertise
Indicates not to advertise matched routes to any peer.
no-export
Indicates not to advertise routes outside the AS but to
other sub ASs.
whole-match
Displays the exactly matched routes.
Example Display the routing information matching the specified BGP community number.
<3Com > display bgp routing community 11:22
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
B - balance
Dest/Mask Next-Hop Med Local-pref Origin As-path
-------------------------------------------------------------------
#^ 1.0.0.0/8 172.10.0.2 0 100 IGP 2
#^ 2.0.0.0/8 172.10.0.2 0 100 IGP 2
For description on the output of the command, see Table 5-7.
View This command can be used in the following views:
■ Any view