Command Reference Guide

62display bgp routing 3Com Router 5000 Family and Router 6000 Family
Command Reference
#^ 129.1.10.0/24 5.5.5.5 0 100 IGP 600
View This command can be used in the following views:
Any view
Table 7 Description on the fields of the display bgp routing command
Field Description
Flags State flags:
# – valid
^ – best
D – damped
H – history
I – internal (IGP)
S – aggregate suppressed (suppressed)
B – balance
Dest/Mask Destination address/mask
Next Hop Next hop IP address
Med Multi-exit discriminator (MED) attribute, in the range 0 to 4,294,967,295
Local-Pref Local preference value, in the range 0 to 4,294,967,295
Origin Origin attribute of the route, which can take on one of the following values:
IGP Indicates that a route is interior to the AS.
Aggregate routes and the routes defined using the network
command are considered IGP routes.
EGP Indicates that a route is learned from the exterior gateway protocol
(EGP).
INC Short for INCOMPLETE. It indicates that the origin of a route is
unknown and the route is learned by other means.
As-path AS-path attribute of the route. It records all ASs traversed by the route for
avoiding routing loops.