Command Reference Guide

60 ● display bgp peer 3Com Router 5000 Family and Router 6000 Family
Command Reference
View the details of peer 1.1.1.10.
<3Com > display bgp peer 1.1.1.10 verbose
Peer: 1.1.1.10+1024 Local: 1.1.1.20+179
Type: Internal
State: Established Flags: <>
Expiring Time: 00:02:49
Last State: OpenConfirm Last Event: RecvKeepAlive
Last Error: None
Options: <>
Peer Version: 4 Peer ID: 1.1.1.10 Local ID: 8.8.8.8
Active Holdtime: 180s, Keepalive: 60s
Group Bit: 0 Send state: in sync
Last traffic (seconds): Received 11 Sent 17 Checked 17
Input messages: Total 3 Updates 2 Octets 439
Output messages: Total 5 Updates 3 Octets 264
Peer capabilities:
Route refresh: advertised and received
Ipv4-family Unicast: advertised and received
Ipv4-family Multicast: advertised and received
Ipv4-family VPNv4: advertised and received
Configuration within the peer :
route-policy specified in export policy : 2
View This command can be used in the following views:
■ Any view
Table 6 Description on the fields of the display bgp peer verbose command
Field Description
Peer: 1.1.1.10+1024 IP address of the peer and the port number for TCP connection
Local: 1.1.1.20+179
Type: Internal BGP version of the peer
State: Established Current state of the peer
Expiring Time: 00:02:49 Displays the remaining lifetime of the peer. This field is displayed only
when the state of the peer is Established
Last State: OpenConfirm The last state of the peer before transitting to the current state
Last Event:
RecvKeepAlive
The last event that triggers state transition
Peer capabilities: The negotiated peer cababilities
Route refresh: Route refreshing cabability. Advertised means route advertisement is
allowed and Received means route updates can be received.
Ipv4-family Unicast: IPv4 unicast address familiy capacity
Ipv4-family Multicast: IPv4 multicast address familiy capacity
Ipv4-family VPNv4: IPv4 VPN address familiy capacity