Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display bgp peer ● 59
Command Reference
display bgp peer
Purpose Use the display bgp peer command to view the information of peer.
Use the
display bgp multicast peer command to view the information of
MBGP peer.
Use the
display bgp vpnv4 peer command to view the information of VPN
peer.
Syntax display bgp [ multicast ] peer [ [ peer-address ] verbose ]
display bgp vpnv4 { all | route-distinguisher route-distinguisher |
vpn-instance vpn-instance-name } peer [ [ peer-address ] verbose ]
Parameters peer-address
Specifies the IP address of the peer to be displayed, in
dotted decimal notation.
vpn-instance
vpn-instance-name
Name of VPN instance.
route-distinguisher
route-distinguisher
Name of route-distinguisher.
verbose
Displays the detailed information of the peer.
Example Display the information of all BGP peers.
<3Com > display bgp peer
Peer AS-num Ver Queued-Tx Msg-Rx Msg-Tx Up/Down State
-------------------------------------------------------------------
1.1.1.10 300 4 0 3 5 00:00:10 Established
2.2.2.11 100 4 0 0 0 Never Idle
Table 5 Description on the fields of the display bgp peer command
Field Description
Peer IP address of the peer
AS-num AS number of the peer
Ver BGP version of the peer
Queued-Tx Number of the packets in the transmit queue
Msg-Rx Number of messages received from this peer
Msg-Tx Number of messages sent to this peer
Up/Down Up/down time of the peer
State Current state of the peer