Command Reference Guide

108 ● display info-center 3Com Router 5000 Family and Router 6000 Family
Command Reference
display info-center
Purpose Use the display info-center command to view all the information recorded in
the info-center.
Syntax display info-center
Parameters None
Example Display the information recorded in the info-center.
<3Com> display info-center
Information Center: enabled
Log host:
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
SNMP Agent:
channel number : 5, channel name : snmpagent
Trap buffer:
enabled,max buffer size 1024, current buffer size : 256,
current messages 0, channel number:3, channel name:trapbuffer
dropped messages 0, overwrote messages 0
Log buffer:
enabled,max buffer size 1024, current buffer size 256,
current messages 89, channel number : 4, channel name : logbuffer
dropped messages 0, overwrote messages 0
logfile:
channel number:9, channel name:channel9, language:English
Information timestamp setting:
log - date, trap - date, debug – boot
Table 15 Description on the fields of the display info-center command
Field Description
Information Center: enabled Information center is enabled
Log host: Information about the log host direction. If configured, the
following information will be displayed:
IP address of log host, name and number of information
channel, language, and level of output information
Console:
channel number: 0,
channel name: console
Information about the console port direction, including name
and number of its information channel
Monitor:
channel number: 1,
channel name: monitor
Information about the monitor direction, including name and
number of its information channel
SNMP Agent:
channel number: 5,
channel name: snmpagent
Information about the SNMP agent direction, including name
and number of its information channel