Command Reference Guide

54 ● default type 3Com Router 5000 Family and Router 6000 Family
Command Reference
default type
Purpose Use the default type command to configure the default type when OSPF
redistributes external routes.
Use the undo default type command to restore the default type when OSPF
redistributes external routes.
Syntax default type { 1 | 2 }
undo default type
Parameters type 1
External routes of type 1.
type 2
External routes of type 2.
Default By default, the external routes of type 2 are redistributed.
Example Specify the default type as type 1 when OSPF redistributes an external route.
[3Com -ospf-1] default type 1
View This command can be used in the following views:
■ OSPF view
Description OSPF specifies the two types of external routing information. The command described
in this section can be used to specify the default type when external routes are
redistributed.
Related Command default tag