Command Reference Guide

3Com Router 5000 Family and Router 6000 Family default-route-advertise ● 51
Command Reference
default-route-advertise
Purpose Use the default-route-advertise command to configure the default route of
Level-1 and Level-2 routers.
Use the undo default-route-advertise command to cancel this
configuration.
Syntax default-route-advertise [ route-policy [ route-policy-name ] ]
undo default-route-advertise [ route-policy [ route-policy-name ] ]
Parameters route-policy-name
Name of the specified route-policy.
Default By default, Level-2 router generates the default route.
Example Set the current router to generate the default route on the LSP of corresponding level.
[3Com -isis] default-route-advertise
View This command can be used in the following views:
■ IS-IS view
Description This command can be set on Level-1 router or Level-2 router. By default, the default
route is generated on L2 LSP. If
apply isis level-1 is set in route-policy view,
the default route will be generated on L1 LSP. If
apply isis level-2 command is
used in route-policy view, the default route will be generated on L2 LSP. If
apply
isis level-1-2
is set in route-policy view, the default route will be generated on
both L1 LSP and L2 LSP.