Command Reference Guide

46 ● default limit 3Com Router 5000 Family and Router 6000 Family
Command Reference
default limit
Purpose Use the default limit command to configure default value of maximum number
of redistributed routes.
Use the undo default limit command to restore the default value.
Syntax default limit routes
undo default limit
Parameters routes
Default value to the redistributed external routes in a
unit time. Valid values are 200 to 2147483647.
If no value is specified, the default value is 1000.
Example Specify the default value of OSPF redistributing external routes as 200.
[3Com -ospf-1] default limit 200
View This command can be used in the following views:
■ OSPF view
Description OSPF can redistribute external route information and broadcast them to the whole
autonomous system, so it is necessary to regulate the default value of external route
information redistributed in one process.
Related Command default interval