Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display hwping statistics ● 107
Command Reference
View This command can be used in the following views:
■ Any view
Description After a test begins, if all the probes in the first test have not been finished, when you
use the command to view statistics all statistics results will be 0.
Min/Max/Average Round Trip Time Roundtrip time in its minimum, maximum, and average
Square-Sum of Round Trip Time The square sum of roundtrip time
Packet lost in test The number of lost packets in a test
Disconnect operation number The number of forcible disconnections performed by the
opposite end
Operation timeout number The number of timeout in a test
System busy operation number The number of test failures due to system busy
Connection fail number The number of connection failures to the opposite end
Operation sequence errors The number of received disordered packets
Drop operation number The number of failures in allocating system resource
Other operation errors The number of other operation errors
Min Positive SD (DS) The jitter value from source to destination (destination to
source) is the minimum of positive value
Max Negative SD (DS) The jitter value from source to destination (destination to
source) is the maximum of negative value
Negative SD (DS)
number/sum/average/square sum
The jitter value from source to destination (destination to
source) is the number/sum/average/square sum of
negative jitter values
SD (DS) lost packets number The number of the lost packets from source to
destination (destination to source)
Unknown result lost packet number The number of the lost packets for unknown reason
Table 14 Description on the fields in the output of the display hwping statistic command
Field Description