Command Reference Guide

3Com Router 5000 Family and Router 6000 Family default interval ● 45
Command Reference
default interval
Purpose Use the default interval command to configure the default interval for OSPF to
redistribute external routes.
Use the undo default interval command to restore the default value of the
default interval of redistributing external routes.
Syntax default interval seconds
undo default interval
Parameters seconds
Default interval for redistributing external routes (in
seconds). Valid values are 1 to 2147483647.
If no value is specified, the default interval for OSPF to
redistribute external routes is 1 second.
Example Specify the default interval for OSPF to redistribute external routes as 10 seconds.
[3Com -ospf-1] default interval 10
View This command can be used in the following views:
■ OSPF view
Description Because OSPF can redistribute the external routing information and broadcast it to
the entire autonomous system, it is necessary to specify the default interval for the
protocol to redistribute external routes.