Command Reference Guide

42 ● default cost 3Com Router 5000 Family and Router 6000 Family
Command Reference
default cost
Purpose Use the default cost command to configure the default routing cost of a
redistributed route.
Use the undo default cost command to restore the default value.
Syntax default cost value
undo default cost
Parameters value
Default routing cost to be set. Valid values are 1 to 16.
If no value is specified, the default value is 1.
Example Set the default routing cost of redistributing other routing protocol routes as 3.
[3Com -rip] default cost 3
View This command can be used in the following views:
■ RIP view
Description If no specific routing cost is specified when redistributing routes from other protocols
with the import-route command, the redistributing will be performed with the
default routing cost specified by the default cost command.
Related Command import-route