Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging rip ● 41
Command Reference
debugging rip
Purpose Use the debugging rip command to enable RIP debugging.
Use the undo debugging rip command to disable RIP debugging.
Syntax debugging rip { packet [ interface type number ] | receive | send }
Parameters packet
Enables the RIP packets debugging.
interface type number
Enables RIP packet debugging on the specified
interface.
receive
Enables the RIP receiving packets debugging.
send
Enables the RIP sending packets debugging.
Example Enable RIP packet debugging.
<3Com > debugging rip packet
View This command can be used in the following views:
■ User view
Description Users can learn the current information of receiving and sending RIP packets on each
interface by using this command.