Command Reference Guide

40 ● debugging ospf 3Com Router 5000 Family and Router 6000 Family
Command Reference
Description In OSPF multi-process, using debugging command, you can enable the debugging
of all the process simultaneously or one of the processes only.
If no process number is specified in the debugging command, the command is valid
to all the processes. And it keeps the state during the router running period no matter
OSPF process exits or not. In this way, the execution of this command will
enable/disable each enabled OSPF debugging. At the same time, the debugging
specified by this command will be enabled automatically when new OSPF is enabled.
If there is a specified process number in the debugging command, only the specified
process is debugged. The configuration command is invalid if OSPF is not enabled.
And the debugging state will not be kept after exiting the process, either.
If you do not define the interface parameter in the debugging command, the
system displays the debugging information of all the interfaces. If you define the
parameter, the system only displays the debugging information of the specified
interface.
Related Command display debugging ospf