Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging ospf ● 39
Command Reference
debugging ospf
Purpose Use the debugging ospf command to enable OSPF debugging.
Use the undo debugging ospf command to disable the function.
Syntax debugging ospf [ process-id ] { event | { packet [ ack | dd | hello |
interface type num | request | update ] } | lsa-generate | spf | te }
undo debugging ospf [ process-id ] { event | { packet [ ack | dd | hello
| interface type num | request | update ] } | lsa-generate | spf | te }
Parameters interface type num
Type and number of the interface.
process-id
OSPF process number. If no process number is
specified, all the process debugging is enabled or
disabled.
event
Enables OSPF event information debugging.
packet
Enables OSPF packet information debugging. There are
five sorts of packets in OSPF as follows:
ack
LSAck packet.
dd
Database Description packet.
hello
Hello message.
request
Link State Request packet.
update
Link State Update packet.
Lsa-generate
Enables OSPF LSA packet information debugging.
spf
Enables the debugging of the calculation of the OSPF
shortest-path tree.
te
Enables the debugging of OSPF TE.
Example Enable the information debugging of OSPF packets.
<3Com > debugging ospf packet
View This command can be used in the following views:
■ User view