Command Reference Guide

36 ● debugging bgp 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging bgp
Purpose Use the debugging bgp command to enable debugging of specified BGP packets
and events.
Use the undo debugging bgp command to disable debugging of specified BGP
packets or events.
Syntax debugging bgp { all | event | normal }
debugging bgp { keepalive | mp-update | open | packet | route-refresh |
update } [ receive | send ] [ verbose ]
undo debugging bgp { all | event | normal | keepalive | mp-update | open
| packet | route-refresh | update }
Parameters all
All BGP debugging items.
event
BGP event debugging.
Normal
BGP normal operation debugging.
keepalive
BGP keepalive packet debugging.
mp-update
MBGP Update packet debugging.
open
BGP Open packet debugging.
packet
BGP packet debugging.
route-refresh
BGP route-refresh packet debugging.
update
BGP Update packet debugging.
receive
Received packet debugging.
send
Sent packet debugging.
verbose
Displays detailed debugging information.
Default By default, debugging is disabled for any items.
Example Enable BGP packet debugging.
<3Com > debugging bgp packet
View This command can be used in the following views:
■ User view
Description System performance is influenced when debugging is enabled. Therefore, this
command should be used cautiously. Disable debugging of any item after gone
through.