Command Reference Guide

106 ● display hwping statistics 3Com Router 5000 Family and Router 6000 Family
Command Reference
display hwping statistics
Purpose Use the display hwping statistics command to view test statistics.
Syntax display hwping statistics [ administrator-name operation- tag ]
Parameters administrator-name
Name of the administrator creating the test.
operation-tag
Test operation tag.
Example Display the statistics information for admin jitter test group, the test type of which is
jitter.
[3Com-hwping-admin-icmp] display hwping statistics admin jitter
Display test statistics:
HWPing entry(admin admin, tag jitter) statistics record:
No. : 1
Destination ip address: 192.168.0.39
StartTime: 2000/1 /2 3 :12:44
LifeTime: 21
Send operation times: 0 Receive response times: 0
Max Round Trip Time: 0 Min Round Trip Time: 0
Sum Round Trip Time: 0 Average Round Trip Time: 0
Square-Sum of Round Trip Time: 0 Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number:0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
Jitter result:
Min Positive SD:0 Min Positive DS:0
Max Positive SD:0 Max Positive DS:0
Positive SD Number:0 Positive DS Number:0
Positive SD Sum:0 Positive DS Sum:0
Positive SD average:0 Positive DS average:0
Positive SD Square Sum:0 Positive DS Square Sum:0
Min Negative SD:0 Min Negative DS:0
Max Negative SD:0 Max Negative DS:0
Negative SD Number:0 Negative DS Number:0
Negative SD Sum:0 Negative DS Sum: 0
Negative SD average:0 Negative DS average:0
Negative SD Square Sum:0 Negative DS Square Sum:0
SD lost packets number:0 DS lost packet number:0
Unkown result lost packet number:0
Table 14 Description on the fields in the output of the display hwping statistic command
Field Description
Start time The time when a test starts
Lifetime The time that a test lasts
Send operation times The number of the sent test packets.
Receive response times The number of successful test attempts