Command Reference Guide

3Com Router 5000 Family and Router 6000 Family cost-style ● 33
Command Reference
cost-style
Purpose Use the cost-style command to set the cost type of an IS-IS packet received/sent
by the router.
Use the undo cost-style command to restore the default setting.
Syntax cost-style { narrow | wide | compatible [ relax-spf-limit ] |
narrow-compatible [ relax-spf-limit ] | wide-compatible }
Parameters narrow
Only receives/sends packets whose cost type is narrow.
wide
Only receives/sends packets whose cost type is wide.
compatible
Receives/sends packets whose cost type is narrow or
wide.
narrow-compatible
Receives packets whose cost type is narrow or wide,
but only send packets whose cost type is narrow.
wide-compatible
Receives packets whose cost type is narrow or wide,
but only send packets whose cost type is wide.
relax-spf-metric
Permits to receive routes whose cost value is larger
than 1024. If this item is not set, the route whose
metrics value is larger than 1024 will be discarded.
Default By default, IS-IS only receives/sends packets whose cost type is narrow.
Example Set IS-IS to receive packets whose cost type is narrow or wide, but only send packets
whose cost type is narrow.
[3Com ] isis
[3Com -isis] cost-style narrow-compatible
View This command can be used in the following views:
■ IS-IS view
Related Command isis cost