Command Reference Guide

32 ● confederation peer-as 3Com Router 5000 Family and Router 6000 Family
Command Reference
confederation peer-as
Purpose Use the confederation peer-as command to specify the sub-ASs constituting a
confederation.
Use the undo confederation peer-as command to expel the specified sub-ASs
from the confederation.
Syntax confederation peer-as as-number-1 [ ......as-number-n ]
undo confederation peer-as [ as-number-1 ] [......as-number-n ]
Parameters as-number-1...as-number-n
Sub-AS numbers, ranging from 1 to 65535. Up to 32
sub-ASs can be configured for a confederation.
Default By default, no sub-AS is configured as a member of the confederation.
Example Configure the confederation to contain AS 2000 and 2001.
[3Com -bgp] confederation peer-as 2000 2001
View This command can be used in the following views:
■ BGP view
Description The sub-ASs specified in this command must be inside a confederation and each
sub-AS must be a fully meshed network. The
confederation id command must
be used to specify the confederation to which each sub-AS belongs; otherwise, this
configuration is invalid
Related Commands ■ confederation nonstandard
■ confederation id