Command Reference Guide

3Com Router 5000 Family and Router 6000 Family bgp ● 27
Command Reference
bgp
Purpose Use the bgp command to enable BGP and enter the BGP view.
Use the undo bgp command to disable BGP.
Syntax bgp as-number
undo bgp [ as-number ]
Parameters as-number
Specifies the local AS number, ranging from 1 to
65535.
Default By default, BGP is not enabled.
Example Enable BGP.
[3Com ] bgp 100
[3Com -bgp]
View This command can be used in the following views:
■ System view
Description This command is used to enable and disable BGP as well as to specify the local AS
number of BGP.