Command Reference Guide

16 ● apply isis 3Com Router 5000 Family and Router 6000 Family
Command Reference
apply isis
Purpose Use the apply isis command to apply the level of a matched route to be
redistributed to Level-1, Level-2 or Level-1-2.
Use the undo apply isis command to remove the setting clause.
Syntax apply isis [ level-1 | level-2 | level-1-2 ]
undo apply isis
Parameters level-1
Redistributes the matched route to Level-1 area.
level-2
Redistributes the matched route to Level-2 area.
level-1-2
Redistributes the matched route to both Level-1 and
Level-2 area.
Default By default, no apply clause is defined.
Example Define an apply clause to set the redistributed route to Level-2.
[3Com -route-policy] apply isis level-2
View This command can be used in the following views:
■ Routing Policy view
Related Commands ■ if-match interface
■ if-match acl
■ if-match ip-prefix
■ if-match ip next-hop
■ if-match cost
■ if-match tag
■ route-policy
■ apply ip-address
■ apply cost
■ apply origin
■ apply tag