Command Reference Guide

104 ● display hwping 3Com Router 5000 Family and Router 6000 Family
Command Reference
display hwping
Purpose Use the display hwping command, you can view test result(s).
Syntax display hwping { result | history | jitter } [ administrator-name
operation-tag ]
Parameters result
Displays the test result.
history
Displays the test history.
jitter
Displays the jitter test information.
administrator-name
Name of the administrator creating the test.
operation-tag
Test operation tag.
Example Display the test result.
[router-hwping-administrator-icmp] display hwping result administrator
icmp
HWPing entry(admin administrator, tag icmp) test result:
Destination ip address:169.254.10.2
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 1/2/1
Square-Sum of Round Trip Time: 13
Last complete test time: 2004-11-25 16:28:55.0
Extend result:
Disconnect operation number:0 Operation timeout number:0
System busy operation number:0 Connection fail number:0
Operation sequence errors:0 Drop operation number:0
Operation statistics errors:0
Table 12 Description of the fields in the output of the display hwping result
command
Field Description
Destination ip address Destination IP address.
Send operation times The number of the sent test packets.
Receive response times The number of successful test attempts
Min/Max/Average Round Trip Time Roundtrip time in its minimum, maximum, and average
Square-Sum of Round Trip Time The square sum of roundtrip time
Last complete test time The time of the last successful test attempt
Disconnect operation number The number of forcible disconnections performed by the
opposite end
System busy operation number The number of test failures due to system busy
Operation sequence errors The number of received disordered packets
Operation statistics errors The number of other errors
Operation temeout number The number of timeout in a test
Connection fail number The numer of connection failures to the opposite end
Drop operation number The number of failures in allocating system resource