Command Reference Guide

3Com Router 5000 Family and Router 6000 Family apply cost-type ● 13
Command Reference
apply cost-type
Purpose Use the apply cost-type command to set the route cost type of route
information.
Use the undo apply cost-type command to cancel the apply clause.
Syntax apply cost-type [ internal | external ]
undo apply cost-type
Parameters internal
Uses the cost type of IGP as MED value of BGP to
advertise route to EBGP peer.
external
External cost type value of IS-IS.
Default By default, route cost type is not set.
Example Set the cost type of IGP as MED value of BGP
[3Com -route-policy] apply cost-type internal
View This command can be used in the following views:
■ Routing Policy view