Command Reference Guide

8 ● aggregate 3Com Router 5000 Family and Router 6000 Family
Command Reference
aggregate
Purpose Use the aggregate command to establish an aggregated record in the BGP routing
table.
Use the undo aggregate command to cancel the function.
Syntax aggregate address mask [ as-set ] [ detail-suppressed ] [
suppress-policy route-policy-name ] [ origin-policy route-policy-name ]
[ attribute-policy route-policy-name ]
undo aggregate address mask [ as-set ] [ detail-suppressed ] [
suppress-policy route-policy-name ] [ origin-policy route-policy-name ]
[ attribute-policy route-policy-name ]
Parameters address
Address of the aggregated route, in dotted decimal
notation.
mask
Network mask of the aggregated route, in dotted
decimal notation.
as-set
Creates a route with AS segment.
detail-suppressed
Only advertises the aggregated route.
suppress-policy
route-policy-name
Suppresses the individual routes selected, some of
which are not advertised.
origin-policy
route-policy-name
Selects the originating routes used for aggregation.
attribute-policy
route-policy-name
Sets the attributes of the aggregated route.
Default By default, there is no route aggregation.
Example Establish an aggregated record in the BGP routing table.
[3Com -bgp] aggregate 192.213.0.0 255.255.0.0
View This command can be used in the following views:
■ BGP view