Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
141142143144145146147148149150
3Com Router 5000 Family and Router 6000 Family display ftp source-ip ● 103
Command Reference
display ftp source-ip
Purpose Use the display ftp source-ip command to display the source IP address
configured for the FTP client.
Syntax display ftp source-ip
Parameters None
Example Display the current source IP address of the FTP client.
<Router> display ftp source-ip
The source IP specified is 0.0.0.0
View This command can be used in the following views:
■ Any view
Description If a source interface has been specified for the FTP client, the IP address of the
interface is displayed. If neither source interface nor source IP address has been
specified for the FTP client, 0.0.0.0 is displayed.