Command Reference Guide

272 ● x25 qllc-switch 3Com Router 5000 Family and Router 6000 Family
Command Reference
x25 qllc-switch
Purpose Use the X25 qllc-switch command to create a QLLC switching map entry, an
association of X.121 address, MAC address of the SNA device, and local virtual MAC
address.
Use the undo X25 qllc-switch command to delete the QLLC switching map
entry.
Syntax X25 qllc-switch x.121-address virtual-mac mac-address [ partner-mac
mac-address ]
X25 qllc-switch x.121-address
Parameters x.121-address
X.121 address of the remote X25 host.
virtual-mac mac-address
Virtual MAC address of the router.
partner-mac mac-address
MAC address of the remote SNA device.
Default By default, no QLLC switching map entry exists.
Example Create a QLLC switching map entry on X.25-encapsulated interface Serial 1/0/0.
[Router] interface serial 1/0/0
[Router-Serial1/0/0] x25 qllc-switch 111 virtual-mac 0011-0000-00c1 parter-mac
0000-1738-6dfb
purpose_body
View This command can be used in the following views:
■ Synchronous Serial Interface view
Description Each asynchronous serial interface can have only one QLLC link, meaning you can
configure only one QLLC switching map entry for a physical interface.