Command Reference Guide

3Com Router 5000 Family and Router 6000 Family udp-helper server ● 269
Command Reference
udp-helper server
Purpose Use the udp-helper server command to configure the destination server to
which the UDP broadcasts received on the interface are forwarded.
Use the undo udp-helper server command to remove the configured
destination server.
Syntax udp-helper server ip-address
undo udp-helper server [ip-address ]
Parameters ip-address
IP address of the destination server, in dotted decimal
format.
Default By default, no destination server is configured.
Example Configure the system to forward all UDP broadcasts received on interface Ethernet
0/0/0 to 192.1.1.2.
[3Com-ethernet 0/0/0] udp-helper server 192.1.1.2
View This command can be used in the following views:
■ Ethernet Interface view
Related Command display udp-helper server