Command Reference Guide

260 ● static-bind ip-address 3Com Router 5000 Family and Router 6000 Family
Command Reference
static-bind ip-address
Purpose Use the static-bind ip-address command to configure an IP address for a
static address binding in DHCP address pool view.
Use the undo static-bind ip-address command to delete the static address
binding in DHCP address pool view.
Syntax static-bind ip-address ip-address [ mask netmask ]
undo static-bind ip-address
Parameters ip-address
IP address to be bound.
netmask
Mask of the IP address to be bound. If it is not
specified, the natural mask will be adopted.
Default By default, no static address binding exists in DHCP address pool view.
Example Bind the PC at the MAC address 0000-e03f-0305 with the IP address 10.1.1.1 using
the mask 255.255.255.0.
[3Com-dhcp-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0
[3Com-dhcp-0] static-bind mac-address 0000-e03f-0305
View This command can be used in the following views:
■ DHCP Address Pool view
Description The static-bind ip-address command must be used in combination with the
static-bind mac-address/static-bind client-identifier command
to bind an IP address with a MAC address or client identifier.
Related Command dhcp server ip-pool