Command Reference Guide

258 ● sot send all tcp 3Com Router 5000 Family and Router 6000 Family
Command Reference
sot send all tcp
Purpose Use the send all tcp command to forward all received SDLC frames to the
specified address.
Use the undo send all tcp command to disable the router to forward the SDLC
frames received on the interface.
Syntax sot send all tcp ip-address
undo sot send all tcp ip-address
Parameters ip-address
IP address of the peer entity.
Default By default, the received SDLC frames are not forwarded.
Example Forward all SDLC frames received on interface Serial 0/0/0 to the specified IP address
131.108.8.1.
[Router-Serial0/0/0] sot send all tcp 131.108.8.1
View This command can be used in the following views:
■ Synchronous Serial Interface view
Description This command is only applicable to simple SOT mode.