Command Reference Guide

3Com Router 5000 Family and Router 6000 Family sot sdlc-status primary ● 255
Command Reference
sot sdlc-status primary
Purpose Use the sot sdlc-status primary command to set the role of the router to
SDLC primary node.
Use the undo sot sdlc-status command to delete the role setting.
Syntax sot sdlc-status primary
undo sot sdlc-status
Parameters None
Default By default, no role is assigned to the router.
Example Specify the router to be SDLC primary node.
[Router-Serial0/0/0] sot sdlc-status primary
View This command can be used in the following views:
■ Synchronous Serial Interface view
Description In SOT local acknowledgement mode, you must assign a role to the router, depending
on the position of the router in the sequence of primary (IBM host), secondary
(router), primary (router), and secondary (terminal). If the router is connected to
terminals, its role is SDLC primary node. Other SOT modes however, do not involve
the role of primary node.