Command Reference Guide

3Com Router 5000 Family and Router 6000 Family sot sdlc broadcast ● 253
Command Reference
sot sdlc broadcast
Purpose Use the sot sdlc broadcast command to configure the broadcast address FF for
the connected SDLC terminals, allowing them to receive broadcast frames.
Use the undo sot sdlc broadcast command to disable SDLC broadcast.
Syntax sot sdlc broadcast
undo sot sdlc broadcast
Parameters None
Default By default, SDLC broadcast is disabled.
Example Configure the broadcast address FF for the connected SDLC terminals.
[Router-Serial0/0/0] sot sdlc broadcast
View This command can be used in the following views:
■ Synchronous Serial Interface view
Related Command sot send address