Command Reference Guide

252 ● sot peer 3Com Router 5000 Family and Router 6000 Family
Command Reference
sot peer
Purpose Use the sot peer command to assign an IP address to the local SOT entity.
Use the undo sot peer command to remove the local SOT entity.
Syntax sot peer ip-address
undo sot peer
Parameters ip-address
IP address of the local SOT entity.
Example Assign the IP address 131.108.254.6 to the local SOT entity.
[Router] sot peer 131.108.254.6
View This command can be used in the following views:
■ System view
Description The IP address provided in this command must belong to an interface that is always
up, a loopback interface for example. Otherwise, the tunnel cannot be established
and the system prompts that the IP address is not a local address.