Command Reference Guide

3Com Router 5000 Family and Router 6000 Family sot group-set ● 251
Command Reference
sot group-set
Purpose Use the sot group-set command to set up a SOT protocol group.
Use the
undo sot group-set command to remove a SOT protocol group.
Syntax sot group-set group-number { simple | sdlc }
undo sot group-set group-number
Parameters group-number
An integer between 1 and 255.
simple
Simple protocol group, corresponding to simple SOT
mode.
sdlc
SDLC protocol group, corresponding to SDLC mode:
pass-through or local.
Default By default, no protocol group is set up.
Example Set up SOT protocol group 5 and specifies its mode to simple.
[Router] sot group-set 5 simple
Set up SOT protocol group 6 and specifies its mode to SDLC.
[Router] sot group-set 6 sdlc
View This command can be used in the following views:
■ System view
Description SDLC protocol groups are well suited to point-to-point or point-to-multipoint SDLC
routing; simple protocol groups are well suited to point-to-point connections.
Related Command sot gather