Command Reference Guide

3Com Router 5000 Family and Router 6000 Family reset dhcp ip-in-use ● 233
Command Reference
reset dhcp ip-in-use
Purpose Use the reset dhcp server ip-in-use command to clear the DHCP dynamic
address binding information, outdated or not.
Syntax reset dhcp server ip-in-use { ip ip-address | pool [ pool-name ] |
interface [ interface-type interface-number ] | all }
Parameters ip-address
Binding information of a specified IP address.
pool-name
Specifies a global address pool. All the global address
pools will apply if no address pool has been specified.
interface-type
interface-number
Specifies an interface address pool. If no interface has
been specified, all the interface address pools will
apply.
all
All the address pools.
Example Clear the binding information of the address 10.110.1.1.
<3Com> reset dhcp server ip-in-use ip 10.110.1.1
View This command can be used in the following views:
■ User view
Related Command display dhcp server ip-in-use