Command Reference Guide

232 ● reset arp 3Com Router 5000 Family and Router 6000 Family
Command Reference
reset arp
Purpose Use the reset arp command to clear the ARP entries in the ARP mapping table.
Syntax reset arp [ all | dynamic | static | interface interface-type
interface-number ]
Parameters all
Indicates to clear all ARP entries.
dynamic
Indicates to clear the dynamic ARP entries.
static
Indicates to clear the static ARP entries.
interface
Indicates the selected interface.
interface-type
Interface type.
interface-number
Interface sequence number.
Example The following example shows how to delete the dynamic entries in the ARP mapping
table on Ethernet 0/0/0.
<3Com> reset arp interface Ethernet 0/0/
View This command can be used in the following views:
■ User view
Description When operation is performed to the interface with specified interface, the interface
type can only be Ethernet, GE or virtual Ethernet and only the dynamic entries can be
deleted on the interface.
Related Commands ■ arp static
■ display arp