Command Reference Guide

3Com Router 5000 Family and Router 6000 Family nat static ● 227
Command Reference
nat static
Purpose Use the nat static command to configure a one-to-one private-to-public address
binding.
Use the undo nat static command to delete an existing one-to-one
private-to-public address binding.
Syntax nat static [ vpn-instance vpn-instance-name ] inside-ip global-ip nat
static ip-addr1 ip-addr2
undo nat static [ vpn-instance vpn-instance-name ] inside-ip global-ip
Parameters inside-ipip-addr1
Private IP address of an internal host.
global-ipip-addr2
Global IP address.
Example Bind an internal private IP address with a public IP address for one-to-one address
translation.
[3Com] nat static 192.168.1.1 2.2.2.2
View This command can be used in the following views:
■ System view