Command Reference Guide

3Com Router 5000 Family and Router 6000 Family nat oubound ● 219
Command Reference
View This command can be used in the following views:
■ Interface view
Description Translation of the source address of the packet that conforms to the ACL is
accomplished by configuring the association between the ACL and the address pool.
The system performs address translation by selecting one address in the address pool
or by directly using the IP address of the interface. Users can configure different
address translation associations at the same interface. The corresponding
undo form
of the command can be used to delete the related address translation association.
Normally, this interface is connected to ISP, and serves as the exit interface of the
inside network.
The command without the address-group parameter implements the "easy-ip"
feature. When performing address translation, the IP address of the interface is used
as the translated address and the ACL can be used to control which addresses can be
translated.