Command Reference Guide

216 ● nat connection-limit-policy 3Com Router 5000 Family and Router 6000 Family
Command Reference
nat connection-limit-policy
Purpose Use the nat connection-limit-policy command to specify the NAT
connection limit policy.
Use the undo nat connection-limit-policy command to delete the policy.
Syntax nat connection-limit-policy policy-number
undo nat connection-limit-policy policy-number
Parameters policy-number
The policy number of NAT connection limit. Valid
values are 0 to 19.
Default By default, the policy is not bound with NAT.
Example Bind policy 1 with NAT.
<3COM> system-view
[3COM] nat connection-limit-policy 1
View This command can be used in the following views:
■ System view
Description The nat connection-limit-policy command can be configured repeatedly. The new
configuration overwrites the previous one.