Command Reference Guide

3Com Router 5000 Family and Router 6000 Family network ● 211
Command Reference
network
Purpose Use the network command to configure an IP address range used for dynamic
allocation.
Use the undo network command to delete the configuration.
Syntax network ip-address [ mask netmask ]
undo network
Parameters ip-address
The subnet address of an IP address pool used for
dynamic allocation.
mask netmask
Network mask of the IP address pool. Natural mask will
be adopted if the parameter is not specified.
Default By default, no IP address range has been configured for dynamic allocation.
Example Use 192.168.8.0/24 as the address space for DHCP address pool 0.
[3Com-dhcp-0] network 192.168.8.0 mask 255.255.255.0
View This command can be used in the following views:
■ DHCP Address Pool view
Description Each DHCP address pool can be configured with a network segment and the new
configuration will replace the old one. If the system requires several such address
segments, you should configure them in multiple address pools.
Related Commands ■ dhcp server ip-pool
■ dhcp server forbidden-ip