Command Reference Guide

3Com Router 5000 Family and Router 6000 Family nbns-list ● 209
Command Reference
nbns-list
Purpose Use the nbns-list command to configure NetBIOS server addresses in a global
DHCP address pool for the clients.
Use the undo nbns-list command to remove the configured NetBIOS server
addresses.
Syntax nbns-list ip-address [ ip-address ]
undo nbns-list { ip-address | all }
Parameters ip-address
IP address of NetBIOS server. You can configure up to
eight IP addresses separated by spaces in a command.
all
All the NetBIOS server IP addresses.
Default By default, no NetBIOS address is configured.
Example In the DHCP address pool 0, allocate the NetBIOS server at 10.12.1.99 to the clients.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-0] nbns-list 10.12.1.99
View This command can be used in the following views:
■ DHCP Address Pool view
Description By far, only up to eight NetBIOS addresses can be configured in each DHCP address
pool.
Related Commands ■ dhcp server ip-pool
■ dhcp server nbns-list interface (System view)
■ dhcp server nbns-list (Interface view)
■ netbios-type