Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ip policy route-policy ● 201
Command Reference
ip policy route-policy
Purpose Use the ip policy route-policy command to enable policy routing at an
interface.
Use the undo ip policy route-policy command to delete the existing policy
routing at an interface.
Syntax ip policy route-policy policy-name
undo ip policy route-policy policy-name
Parameters policy-name
Policy name.
Default By default, interface policy routing is disabled.
Example Enable the policy routing specified by route-policy AAA at the interface Ethernet
0/0/0.
[3Com-ethernet0/0/0] ip policy route-policy AAA
View This command can be used in the following views:
■ Interface view
Related Command ip local policy route-policy