Command Reference Guide

198 ● ip local policy route-policy 3Com Router 5000 Family and Router 6000 Family
Command Reference
ip local policy route-policy
Purpose Use the ip local policy route-policy command to enable local policy
routing.
Use the undo ip local policy route-policy command to delete the
existing setting of the policy routing.
Syntax ip local policy route-policy policy-name
undo ip local policy route-policy policy-name
Parameters policy-name
Policy name.
Default By default, interface local policy routing is disabled.
Example Enable a local policy routing at system view. The policy routing is specified by
route-policy AAA.
[3Com] ip local policy route-policy AAA
View This command can be used in the following views:
■ System view
Description This command is used to enable or disable the local policy routing for the packets sent
by the local device. If there is no special demand, it is recommended that users do not
configure local policy routing.
Related Command ip policy route-policy