Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display device ● 95
Command Reference
display device
Purpose Use the display device command to view information on the hardware
configurations of the system, including in-position state of the RPU, NPU, interface
cards, power module, and fan module, the operating state of the interface cards,
power module, and fan module, as well as the offline state of RPU and NPU.
Syntax display device slot-number
Parameters slot-number
Slot number.
Example Display basic information about the facilities on the router.
<3Com> display device
Slot # Type Online Status
0 RPU Present Normal
6 PWR Present Normal
7 FAN Present Normal
View This command can be used in the following views:
■ Any view
Description If no slot is specified, the basic information about all the facilities in position is
displayed. If a slot is specified, only details about the slot are displayed, including
records of the reset times and causes.
Table 10 Description on the fields of the display device command
Field Description
Slot # Slog number
Type Name of the hardware unit
Online Indicates whether the hardware unit is present. A value of Present
indicates that the unit has been installed correctly.
Status Status of the hardware unit