Command Reference Guide

196 ● ip count timeout 3Com Router 5000 Family and Router 6000 Family
Command Reference
ip count timeout
Purpose Use the ip count timeout command to configure the aging time of IP
accounting entries.
Use the undo ip count timeout command to restore the default aging time.
Syntax ip count timeout minutes
undo ip count timeout
Parameters minutes
Aging time of IP accounting entries (in minutes). Valid
values are 60 to 10,080 minutes.
If no value is specified, the default is 720 minutes, or
12 hours.
Example Set the aging time of IP accounting entries to 100 minutes.
[3Com] ip count timeout 100
Restore the default aging time of IP accounting entries.
[3Com] undo ip count timeout
View This command can be used in the following views:
■ System view
Description If an IP accounting entry does not receive a new IP packet before its aging time
expires, the entry is considered expired and then deleted.