Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
1371137213731374137513761377137813791380
3Com Router 5000 Family and Router 6000 Family ip count outbound-packets ● 195
Command Reference
ip count outbound-packets
Purpose Use the ip count outbound-packets command to configure the IP Accounting
to count outbound IP packets on the current interface.
Use the undo ip count outbound-packets command to restore the default.
Syntax ip count outbound-packets
undo ip count outbound-packets
Parameters None
Default By default, outbound IP packets on the interface are not counted.
Example Configure the IP Accounting to count outbound IP packets on an interface.
[3Com-Ethernet0/0/0] ip count outbound-packets
Configure the IP Accounting not to count outbound IP packets on an interface.
[3Com-Ethernet0/0/0] undo ip count outbound-packets
View This command can be used in the following views:
■ Interface view
Description When counting outbound IP packets on the interface, the IP Accounting assigns them
to the exterior hash table or the interior hash table according to the IP count rule list.