Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
1371137213731374137513761377137813791380
192 ● ip count inbound packets 3Com Router 5000 Family and Router 6000 Family
Command Reference
ip count inbound packets
Purpose Use the ip count inbound-packets command to configure the IP Accounting
to count inbound IP packets on the current interface.
Use the undo ip count inbound-packets command to configure the IP
Accounting to restore the default.
Syntax ip count inbound-packets
undo ip count inbound-packets
Parameters None
Default By default, inbound IP packets on the interface are not counted.
Example Configure the IP Accounting to count inbound IP packets on the interface.
[3Com-Ethernet0/0/0] ip count inbound-packets
Configure the IP Accounting to count inbound IP packets on the interface.
[3Com-Ethernet0/0/0] undo ip count inbound-packets
View This command can be used in the following views:
■ Interface view
Description When counting inbound IP packets on the interface, the IP Accounting assigns them
to the exterior hash table or the interior hash table according to rules in the IP
accounting list.