Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ip count firewall denied ● 191
Command Reference
ip count firewall denied
Purpose Use the ip count firewall-denied command to configure the IP Accounting
to count the IP packets denied by the firewall on the current interface.
Use the undo ip count firewall-denied command to restore the default.
Syntax ip count firewall-denied { inbound-packets | outbound-packets }
undo ip count firewall-denied { inbound-packets | outbound-packets }
Parameters inbound-packets
Counts the inbound IP packets denied by the firewall
on the current interface.
outbound-packets
Counts the outbound IP packets denied by the firewall
on the current interface.
Default By default, IP packets denied by the firewall are not counted on the current interface.
Example Configure the IP Accounting to count the outbound IP packets denied by the firewall
on the current interface.
[3Com-Ethernet0/0/0] ip count firewall-denied outbound-packets
Configure the IP Accounting not to count the outbound IP packets denied by the
firewall on the current interface.
[3Com-Ethernet0/0/0] undo ip count firewall-denied outbound-packets
View This command can be used in the following views:
■ Interface view
Description Information about counted IP packets is stored in the firewall-list table.